Model WD-08

Voltage range DC45V~48V

Current range 4.44-4.66A

Power range 200W~224W

Fog formation range 4-5L/H

Mist particles 0-10 μ m

The optimal water level exceeds the top of the water level sensing switch by 10-20mm

Protect the water level to be 2-8mm below the top of the water level sensing switch

Shutdown protection temperature 60 ℃± 5

Temperature protection restored to 50 ℃

Atomization film attenuates for 3000-4000 hours

Material: 304 polished stainless steel shell, brass nickel chromium plated metal pressure ring

Atomizer specification Ø 20mm, 1.7MHz oscillation frequency

Exterior specifications 228 * 80 * 52 (mm)

Weight 1.00KG

Power cord 2 * 1mm2, regular wire 1.5M

Adaptive power supply DC260W power supply

Black capacitive water level switch

Double hole positions at both ends of the installation hole

Suitable for solution tap water, pure water

Detailed explanation of atomizer parameters:

Fogging amount

The ability of the atomizer to atomize water per hour under standard operating conditions (rated power supply and reasonable working environment), measured in L/H (liters per hour).

Mist output

The atomizer works in the equipment water tank, and the mist is carried out by the fan. The actual water consumption of the atomizer is measured in liters per hour (L/H). The mist output is affected by the atomization box.

Fogging rate

The ratio of the mist output of the atomizer to the mist output of the equipment is generally above 80%, which is reasonable.

Optimal working water level

The water level exceeds the top of the water level sensing switch by 10-20 millimeters (mm), and when it reaches 20mm, the mist particles are the finest and the amount of mist remains unchanged. The optimal water level varies slightly under different operating conditions.

Protect water level

When the water level is 2mm-8mm below the top of the water level sensing switch (different water quality may vary), the atomizer stops working.

matters needing attention:

The power cord of the atomizer is red positive and black negative, and the power indicator light is on when powered on normally.

2. The input DC voltage of the atomizer should not exceed 50VDC, as excessive input voltage may cause damage to the atomizer.

3. After the atomizer is put into use, it is necessary to regularly clean the atomizer and the mist tank. The surface scale of the atomizer will affect the reliability of water level protection and the service life of the atomizer.

4. The atomizing plate is a consumable part. If the working water column of the atomizer is low and the mist output is significantly reduced, the atomizing plate can be replaced by oneself.

The atomizer only produces a water column and does not produce mist, which is related to the depth of water level, water quality, and water temperature

5. If there are any other uncertainties, please contact our company!